Sleepy Creek Coil Spring Traps
Sleepy Creek
$ 9.95
Coilspring Traps
#1 Coil Spring Trap
• Frame - One-piece construction, 1/8" thick with center mounted chain.
• Pan - One-piece construction, rectangular style with crimped bolt and nut.
• Standard Jaw - Four-inch spread.
• Double Jaw - Four-inch spread.
• Chain - #2/0 double link with two swivel points, ring and drowner.
• Springs - Heavy duty 11-guage spring wire.
• Levers - Heavy duty 0.62" thick steel.
• Weight - 14 ounces
Target Species: Muskrat, Mink, Weasel, Fisher, Squirrel, Opossum and Skunk.
#1-1/2 Coil Spring Trap
• Frame - Two-piece 1/8" thick x 7/8" wide construction. Center mounted chain.
• Pan Post - 1/8" thick and welded through the cross.
• Standard Jaw - 4-7/8" jaw spread, 5/32" x 1/2" with corner radius to prevent cutting.
• Offset Jaw - 5" jaw spread, with a face that averages nearly twice that of the standard jaw.
• Chain - #2/0 double link, with two swivel points, ring and drowner.
• Pan - Two-piece construction with crimped bolt and nut.
• Springs - Heavy duty 10-gauge spring wire.
• Levers - Heavy duty .075" thick steel.
• Weight - 1 pound 5.44 ounces
Target Species: Fox, Fisher, Marten, Mink, Muskrat, Nutria, Opossum, Raccoon, Skunk and Woodchuck.
#1-1/2 Double Jaw Coil Spring Trap
Jaw Spread: 4-7/8", 5/32" x 1/2" with corner radius to prevent cutting. The wire form is .162 diameter wire offset from the inside jaw edge and welded at the top.
#1-3/4 Coil Spring Trap
•Frame - Two-piece 1/8" thick x 7/8" wide construction. Base is reinforced with 1/16" thick chain strap with center mounted chain.
• Pan Post - 1/8" thick and welded through the cross.
• Standard Jaw - 5-3/8" spread, 5/32" x 1/2" with corner radius to prevent cutting.
• Offset Jaw - 5-9/16" spread. Face averages nearly twice that of standard jaw.
• Chain - #2/0 double link with three swivel points.
• Pan - Two-piece construction with crimped bolt and nut.
• Springs - Heavy duty 9-gauge spring wire.
• Levers - Heavy duty .075" thick steel.
• Weight - 1 pound 7 ounces
Target Species: Badger, Bobcat, Coyote, Fisher, Fox, Lynx, Nutria, Otter and Raccoon.
#1-3/4 Coil Spring Trap - Round Pan
• Frame - Two-piece 1/8" thick x 7/8" wide construction. Base is reinforced with 1/16" thick chain strap with center mounted chain.
• Pan Post - 1/8" thick and welded through the cross.
• Standard Jaw - 5-3/8" spread, 5/32" x 1/2" with corner radius to prevent cutting.
• Offset Jaw - 5-9/16" spread. Face averages nearly twice that of standard jaw.
• Chain - #2/0 double link with three swivel points.
• Pan - Two-piece construction with crimped bolt and nut.
• Springs - .148 diameter hard drawn MB spring wire on regular jaw; .156 diameter on offset jaw.
• Levers - Heavy duty .075" thick steel.
• Weight - 1 pound 7 ounces
#1-3/4 Coil Spring Trap 4x4
•Frame - Two-piece 1/8" thick x 7/8" wide construction. Base is reinforced with 1/16" thick chain strap with center mounted chain.
• Cross - Integral gusseted pan post with installed pan post hardware.
• Standard Jaw - 5-3/8" spread, 5/32" x 1/2" with corner radius to prevent cutting.
• Offset Jaw - 5-9/16" spread. Face averages nearly twice that of standard jaw.
• Chain - #2/0 double loop with three swivel points. Standard jaw trap has standard chain assembly; offset jaw trap has short chain assembly.
• Pan - Straddle pan has a notch to allow for visual dog engagement and is attached with 8/32 brass bolt and nut..
• Springs - 4 coils are wound out of .125 diameter music wire for holding power..
• Levers - Heavy duty .075" thick steel.
• Weight - 1 pound 9 ounces, standard; 1 pound 8 ounces, offset.
#3 Coil Spring Trap
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gussetted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 5-13/16" spread, 5/32" x 9/16" with corner radius to prevent cutting.
• Offset Jaw - 6" spread, the face averages nearly twice that of the standard jaw.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds .32 ounces
Target Species: Badger, Beaver, Bobcat, Coyote and Lynx.
#4 Coil Spring Trap
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 6-5/16" spread, 5/32" x 9/16" with corner radius to prevent cutting.
• Offset Jaw - 6-1/2" spread. The face averages nearly twice that of the standard jaw.
• Chain - #2 machine chain twist link, center mounted with three swivel points.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds 1.25 ounces
Target Species: Badger, Beaver, Bobcat, Coyote, Lynx and Otter.
#440 Nitro Offset
• Frame - Two-piece, 1/8" thick x 1" wide with reinforcing D-ring chain strap and 1" D-ring.
• Cross - Integral gusseted pan post with a hole for an adjustable pan stop.
• Standard Jaw - 6-5/16" spread, 5/32" x 9/16" with corner radius to prevent cutting.
• Offset Jaw - 6-1/2" spread. The face averages nearly twice that of the standard jaw.
• Pan - One-piece construction with visual dog engagement and crimped bolt and nut.
• Springs - Heavy duty 8-gauge spring wire.
• Levers - Heavy duty .090" thick steel set at a 60-degree angle.
• Weight - 2 pounds
Target Species: Badger, Beaver, Bobcat, Coyote, Lynx and Otter.